Cased spring Mounts

About Cased spring Mounts

Feature

• Color coded springs to facilitate identification.
• Powder coated springs.
• Load upto 5000 kgs.*
• Deflection upto 25mm*
• 4 Models
• 26 Load Ranges
• Deflection is at rated load with 15% Tolerances.
• All mounts have approximately 50% overload capacity.
• Unique mount design provides horizontal stability, high loading capacity and protective spring enclosure
• All mounts have external leveling arrangement, capable of compensating for full static deflection.
• Inner walls of lower casing have resilient rubber snubbers which;
• Eliminates possibility of binding by providing a smooth guide path for the top casing.
• Limits lateral movement, particularly due to start-up, shut-down and horizontal wind load.
• Prevents isolator short-circuiting by avoiding metal to metal contact.
• Neoprene inserts below springs and 6 mm thick ribbed base pad act as noise breaks for high frequencies in the audible range, which can otherwise get transmitted to building structure.
• Mountings must be adjusted so that upper housing clears lower housing by at least 6 mm and not more then 12 mm